How do I fix error code C-d1 on a Samsung ovens & ranges?

1. undefined: Disconnect power and open back cover 2. undefined: Check harness connection with door lock switch and motor 3. undefined: Measure door lock motor resistance (should be 1.75-1.95 kilo-ohms) 4. undefined: Measure voltage during door lock operation (should be AC 120V) 5. undefined: Test door locking switch continuity (Open: infinity ohms, Closed: 0 ohms) 6. undefined: Replace micro switch or lock motor if faulty 7. undefined: Replace Main PCB if connectors are damaged

Samsung Ovens & Ranges

Error Code C-d1

Q: What does error code C-d1 mean on a Samsung ovens & ranges?

Door locking information / Door lock malfunction Loose or disconnected door lock harness; Faulty door lock motor; Defective door lock switch; Damaged wire harness

Door locking information / Door lock malfunction

Moderate

Address soon - your appliance may not work properly

What This Means

Loose or disconnected door lock harness; Faulty door lock motor; Defective door lock switch; Damaged wire harness

How to Fix

1
Disconnect power and open back cover
2
Check harness connection with door lock switch and motor
3
Measure door lock motor resistance (should be 1.75-1.95 kilo-ohms)
4
Measure voltage during door lock operation (should be AC 120V)
5
Test door locking switch continuity (Open: infinity ohms, Closed: 0 ohms)
6
Replace micro switch or lock motor if faulty
7
Replace Main PCB if connectors are damaged

This Error Applies To

Samsung NX60A6311 Series Ovens & Ranges

Service manual exact match: NX60A6311

Related Error Codes

C-21

Oven heating over / Oven temperature too high

C-F2

Sub-to-Touch communication error / Control panel communication malfunction

C-20

Oven sensor opened

Need more help with your Samsung ovens & ranges?