Prax
Sign InGet Started
Samsung Ovens & Ranges2022–present

Error Code C-20

Oven temperature sensor open circuit (resistance over 2950 ohms) or shorted (resistance under 930 ohms)

Moderate

Address soon - your appliance may not work properly

What This Means

Broken or damaged oven temperature sensor; Disconnected sensor harness; Damaged terminal or wire harness; Poor sensor connector connection

How to Fix

  1. 1

    Disconnect power and open the back cover

  2. 2

    Disconnect sensor harness from control unit

  3. 3

    Measure sensor resistance (should be 1080Ω at room temperature)

  4. 4

    If resistance is incorrect, replace oven sensor

  5. 5

    Check for damaged terminals or wire harness

  6. 6

    Verify connector CN100 of Sub PCB (Normal: 1080Ω)

This Error Applies To

Samsung NX60T8511S Series Ovens & Ranges (2022) (2022–present)

Service manual exact match: NX60T8511**Service manual exact match: NX60BB8511**Service manual exact match: NX60T8511S*Service manual exact match: NX60T8511SSService manual exact match: NX60T8511SGService manual exact match: NX60BB8511SSService manual exact match: NX60BB8511SG

Related Error Codes

C-d1

Door lock malfunction — door locking mechanism not operating correctly

C-21

Oven overheating — oven temperature is rising excessively beyond set point

C-F2

Sub PCB to touch panel communication error — touch IC and PCB signal malfunction

C-A2

Ambient temperature of display PCB is extremely high — control board overheating due to cooling fan failure

C-24

Oven vent blocked — airflow obstruction detected at oven vent or cover air outlet

Need more help with your Samsung ovens & ranges?