How do I fix error code F-C on a Samsung ovens & ranges?

1. undefined: Disconnect electrical power to the range 2. undefined: Remove the upper rear cover panel 3. undefined: Measure sensor resistance at room temperature 4. undefined: Check for damaged terminals or wires on harness 5. undefined: Disconnect sensor connector from PCB 6. undefined: Check resistance of oven sensor connector on PCB 7. undefined: If problems found: Replace the oven temperature sensor 8. undefined: If no problems: Check for damaged wires or terminals on harness

Samsung Ovens & Ranges

Error Code F-C

Q: What does error code F-C mean on a Samsung ovens & ranges?

Oven Sensor Opened Over Oven temperature sensor open circuit; Damaged wire or terminal on harness; Sensor thermistor failure

Oven Sensor Opened Over

Moderate

Address soon - your appliance may not work properly

What This Means

Oven temperature sensor open circuit; Damaged wire or terminal on harness; Sensor thermistor failure

How to Fix

1
Disconnect electrical power to the range
2
Remove the upper rear cover panel
3
Measure sensor resistance at room temperature
4
Check for damaged terminals or wires on harness
5
Disconnect sensor connector from PCB
6
Check resistance of oven sensor connector on PCB
7
If problems found: Replace the oven temperature sensor
8
If no problems: Check for damaged wires or terminals on harness

This Error Applies To

Samsung NXFSS Series Ovens & Ranges

Service manual exact match: NX-KSBService manual exact match: NX-KSSService manual exact match: NX-FSSService manual exact match: NX-KSW

Related Error Codes

F-Cd

Safety Error - Shorted Key

Need more help with your Samsung ovens & ranges?