Error Code 41-E
Display cannot communicate with refrigerator control computer
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 41-E
What This Means
Loose or corroded connector between display and main board; Damaged communication cable or wiring; Main PCB or Panel PCB failure; Loose connector pin preventing proper signal transmission
What actually causes this:
A loose wire or connector between the display and main control board has prevented the system from communicating
First Thing to Check
Unplug the refrigerator for 2 minutes to reset the system; check the connector near the top of the unit for looseness
Parts Involved
How to Fix
- 1
1. Unplug the refrigerator for 5 minutes
- 2
2. Check all connectors between display panel and main board
- 3
3. Verify connector pins are fully inserted and not bent
- 4
4. Clean connector contacts with dry cloth if corroded
- 5
5. Plug in and observe if error clears after 1 minute
This Error Applies To
Samsung RF30HBEDBSR Series Refrigerators (2014) (2014–present)