Error Code IE
Too much water is in the washer or the water level sensor failed
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: Mid LED flash
What This Means
Water level sensor defective; Water supplied continuously due to freezing; Foreign materials in the water supply valve causing continuous fill; Water level sensor hose torn or has a hole
What actually causes this:
The water level sensor stopped working or a hose has a hole, so the washer can't tell how full it is
First Thing to Check
Unplug the washer right away if you see water overflowing
Parts Involved
How to Fix
- 1
1. If the water level sensor has a functional error, replace it
- 2
2. Check the hose — Mid LED flashes if it is torn or has a hole
- 3
3. Check if water is frozen in the winter season — use hair dryer to defrost hose. Consider relocating the unit to warmer location
This Error Applies To
Samsung WA41A3000A Series Washers (2024) (2024–present)
Related Error Codes
The washer lid is open while it's trying to run
The control boards inside the washer can't communicate
Water is leaking inside the washer
The laundry load is uneven and the washer can't spin safely
The incoming water is too hot
A button on the washer control panel appears stuck
The washer can't detect the water level properly
The washer isn't filling with water