Error Code 8C2
The washer's vibration sensor has a data reading error
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C2
What This Means
MEMS PBA has an internal error; Data error detected from MEMS PBA; Wire connections to MEMS PBA are faulty; MEMS PBA is defective
What actually causes this:
The vibration sensor board has failed or has a loose connection
First Thing to Check
Unplug the washer for 5 minutes and plug it back in to reset
Parts Involved
How to Fix
- 1
1. Check the wire connections to the MEMS PBA
- 2
2. Replace the MEMS PBA if defective
This Error Applies To
Samsung WA45H7000A Series Washers (2024) (2024–present)
Related Error Codes
The washer cannot detect the correct water level inside the tub
The washer's motor cannot spin properly
The washer's WiFi module has lost connection to the main board
The washer's display module has lost connection to the main board
The washer's main computer has malfunctioned
The washer's main computer has malfunctioned
The washer's main computer has malfunctioned
The washer cannot detect the water level inside the tub