Error Code tE1
The water temperature sensor isn't working right
Moderate
Address soon - your appliance may not work properly
Also displayed as: tE1
What This Means
Washing heater sensor fault; Connector connected incorrectly or disconnected; Wire disconnected; Contact error; Water frozen causing sensor to detect 100-150°C overheating; Main PCB fault
What actually causes this:
The temperature sensor got disconnected or broke
First Thing to Check
Unplug for a minute and restart
Parts Involved
How to Fix
- 1
1. Check thermistor resistance at 20-30°C: 66.187kΩ to 36.941kΩ
- 2
2. Check temperature sensor connections
- 3
3. If functional error, replace sensor
This Error Applies To
Samsung WA45H7000AW Series Washers (2024) (2024–present)
Related Error Codes
The display module can't communicate with the main board
The motor controller can't communicate with the main board
The laundry load is uneven
There are too many soap suds
An internal sensor board has stopped working
The washer's main computer chip has failed
The washer is getting too much power
The washer isn't getting enough power