Error Code OC
Too much water is in the washer
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OC
What This Means
Water level sensor fault; Freezing in winter; Foreign material in water supply valve; Water level sensor defective
What actually causes this:
The water level sensor stopped working
First Thing to Check
Unplug immediately. Restart after water drains.
Parts Involved
How to Fix
- 1
1. Restart after spinning
- 2
2. If water level sensor has functional error, replace it
- 3
3. Check hose for tears/holes
- 4
4. If frozen, use hair dryer and consider relocating
This Error Applies To
Samsung WA45T3400A Series Washers (2024) (2024–present)
Related Error Codes
The washer isn't getting enough power
The motor controller can't communicate with the main board
The clutch sensor is giving incorrect readings
The control boards can't communicate
The washer can't detect the water level properly
The washer lid is open
The door lock mechanism has failed
The washer's heater is getting too hot