Error Code 1E
The washer can't detect the water level properly
Moderate
Address soon - your appliance may not work properly
Also displayed as: 1E
What This Means
Water level sensor fault; Incorrect connections; Sensor hose folded; Main PCB fault
What actually causes this:
The air tube connected to the water level sensor is kinked or disconnected
First Thing to Check
Unplug the washer, wait a minute, and try again
Parts Involved
How to Fix
- 1
1. Check water level sensor and connector are connected
- 2
2. Check frequency: approx 26.4 KHz without water (Min 25.9 KHz)
- 3
3. Check terminal connections (Blue wire, Orange wire)
- 4
4. If sensor is faulty, replace it
- 5
5. If error persists after above, replace PBA
This Error Applies To
Samsung WA48H7400AW Series Washers (2024) (2024–present)
Related Error Codes
The door lock mechanism is stuck
Water is leaking inside the washer
Too much water is in the washer
The washer can't detect its clutch position
The clutch sensor may be affected by too many soap suds
The temperature sensor isn't working right
The laundry load is uneven
There are too many soap suds