Error Code 4C2
The water coming into your washer is too hot for the selected cycle.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 4C2
What This Means
Water supplied through dry valve during dry cycle exceeds 70°C; Water temperature exceeds 50°C during Wool or Lingerie cycle
What actually causes this:
The hot and cold water hoses are usually connected to the wrong inlets — they are swapped.
First Thing to Check
Check that the hot water hose goes to the hot inlet and the cold hose goes to the cold inlet.
Parts Involved
How to Fix
- 1
1. Verify the hot water supply temperature is not excessively high
- 2
2. Check the temperature sensor reading
- 3
3. Check if the hot and cold water hoses are connected to the correct inlets
This Error Applies To
Samsung WA50R5400A Series Washers (2022) (2022–present)
Related Error Codes
The vibration sensor may have failed.
An antibacterial system component has stopped working.
Your washer cannot detect how much water is in the tub.
A sensor module inside the washer has lost its connection.
The motor's speed controller has lost its connection to the main board.
Your washer cannot pump the water out.
The washer's WiFi module has lost its connection to the main board.
Your washer thinks a button is stuck or being held down.