Error Code 8C
An antibacterial system component has stopped working.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C
What This Means
MEMS PBA wire connection fault; Main PBA Silver Nano part malfunction; MEMS PBA fault
What actually causes this:
A wire connection to the Silver Nano antibacterial part has come loose.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check wire connections to MEMS PBA
- 2
2. Replace MEMS PBA if necessary
- 3
3. Check Main PBA wire connection or Silver Nano part — replace if necessary
This Error Applies To
Samsung WA50R5400A Series Washers (2022) (2022–present)
Related Error Codes
The vibration sensor may have failed.
Your washer cannot detect how much water is in the tub.
A sensor module inside the washer has lost its connection.
The motor's speed controller has lost its connection to the main board.
Your washer cannot pump the water out.
The washer's WiFi module has lost its connection to the main board.
Your washer thinks a button is stuck or being held down.
The water heater inside the washer is not working properly.