Error Code TC1
The water temperature sensor inside the wash tub is not reading correctly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC1
What This Means
Washing temperature sensor fault; Connector connected incorrectly or disconnected; Wire disconnected or contact fault; Water level sensor operates without water (frozen); Overheat protection sensor detects 100-150°C; Main PCB fault
What actually causes this:
The temperature sensor connector has worked loose, or the sensor itself has failed.
First Thing to Check
Unplug the washer, wait one minute, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the connections for the washing heater temperature sensor connector
- 2
2. If the washing heater temperature sensor has a functional error, replace it
- 3
3. Check for frozen water conditions that could cause sensor misreading
This Error Applies To
Samsung WA50R5400A Series Washers (2022) (2022–present)
Related Error Codes
The washer's main computer has crashed.
The washer's main computer has crashed.
The vibration sensor may have failed.
An antibacterial system component has stopped working.
The temperature sensor for the drying function is not reading correctly.
The laundry inside the washer is bunched up on one side.
There are too many soap suds in the washer.
The vibration sensor board has a fault.