Error Code 4C2
The incoming water is too hot for the selected cycle
Moderate
Address soon - your appliance may not work properly
Also displayed as: 4C2
What This Means
Water supplied through the dry valve during a dry cycle is sensed as higher than 70°C; Water temperature sensed as higher than 50°C in Wool or Lingerie courses; Hot water supply line temperature too high
What actually causes this:
The hot and cold water hoses are swapped, or your water heater is set too high
First Thing to Check
Check that the hot and cold water hoses behind the washer are connected to the correct faucets
Parts Involved
How to Fix
- 1
1. Check the water temperature from the home hot water supply
- 2
2. Verify the hot and cold water supply hoses are not swapped
- 3
3. Check the temperature sensor for correct readings
- 4
4. If water temperature is normal, check the Main PBA
This Error Applies To
Samsung WA52J8700A Series Washers (2017) (2017–present)
Related Error Codes
An internal circuit board can't communicate with the main controller
A drying temperature sensor has a problem
There are too many soap suds in the washer
A sensor board inside the washer isn't reading data correctly
A sensor board inside the washer has failed
The washer's main computer chip has malfunctioned
The washer can't detect the position of its internal clutch mechanism
The washer's main computer chip has malfunctioned