How do I fix error code LC on a Samsung washers?

1. undefined: 1. Check if there is any alien substance in the Draining Bellows — for natural draining, remove the alien substance 2. undefined: 2. Check if there is any alien substance such as underwear, coins, wire, etc. 3. undefined: 3. Check if water leaks from the tub connection part 4. undefined: 4. If the drain motor is defective, replace the motor 5. undefined: 5. Check for product assembly defect or internal hose part leakage

Samsung Washers2017–present

Error Code LC

Q: What does error code LC mean on a Samsung washers?

The washer has detected a water leak Air hose out of place causing water leakage during spin cycle; Tub back at safety bolts fixing part broken; Too much detergent causing foaming and water leakage at front; Connecting hose to detergent drawer connected incorrectly; Drain pump filter cover engaged incorrectly; Water leakage at drain hose; Duct condensing holding screws worn; Nozzle-diaphragm engaged in opposite direction or rubber packaging omitted; Screws holding tub back and front fastened incorrectly; Leakage sensor faulty; Alien substance in the DV Case or Draining Bellows

The washer has detected a water leak

Critical

Stop using immediately - risk of damage or safety issue

Also displayed as: LC

What This Means

Air hose out of place causing water leakage during spin cycle; Tub back at safety bolts fixing part broken; Too much detergent causing foaming and water leakage at front; Connecting hose to detergent drawer connected incorrectly; Drain pump filter cover engaged incorrectly; Water leakage at drain hose; Duct condensing holding screws worn; Nozzle-diaphragm engaged in opposite direction or rubber packaging omitted; Screws holding tub back and front fastened incorrectly; Leakage sensor faulty; Alien substance in the DV Case or Draining Bellows

What actually causes this:

Something is stuck in the drain area causing water to back up and leak, or a hose connection has come loose

First Thing to Check

Check around and under the washer for visible water — if you see pooling water, unplug the washer and turn off the water supply

Parts Involved

Leakage SensorDrain PumpDraining BellowsTub AssemblyHoses

How to Fix

1
1. Check if there is any alien substance in the Draining Bellows — for natural draining, remove the alien substance
2
2. Check if there is any alien substance such as underwear, coins, wire, etc.
3
3. Check if water leaks from the tub connection part
4
4. If the drain motor is defective, replace the motor
5
5. Check for product assembly defect or internal hose part leakage