Error Code PC1
A sensor in the washer's clutch mechanism is giving bad readings
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC1
What This Means
Clutch hall sensor signal abnormal after position detection; Clutch hall sensor defective; Wiring issue between clutch sensor and main PBA
What actually causes this:
The clutch position sensor has gone bad after initially working
First Thing to Check
Unplug the washer for 5 minutes, then plug it back in
Parts Involved
How to Fix
- 1
1. Check the clutch hall sensor connections
- 2
2. Check the clutch hall sensor signal
- 3
3. Replace clutch assembly if sensor is defective
This Error Applies To
Samsung WA52J8700A Series Washers (2017) (2017–present)
Related Error Codes
An internal circuit board can't communicate with the main controller
A drying temperature sensor has a problem
There are too many soap suds in the washer
A sensor board inside the washer isn't reading data correctly
A sensor board inside the washer has failed
The washer's main computer chip has malfunctioned
The washer can't detect the position of its internal clutch mechanism
The washer's main computer chip has malfunctioned