Error Code TC1
The wash water temperature sensor isn't reading correctly
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC1
What This Means
Washing temperature sensor fault; Connector connected incorrectly or disconnected; Water level sensor operating without water (frozen) causing temperature sensor to detect 100-150°C; Temperature sensor wire disconnected or contact error; Main PCB fault
What actually causes this:
The temperature sensor wire came loose or the sensor itself went bad
First Thing to Check
Unplug the washer for 5 minutes, then plug it back in — if the error comes back, it needs service
Parts Involved
How to Fix
- 1
1. Check the connections for the washing heater temperature sensor connector
- 2
2. If the washing heater temperature sensor has a functional error, replace it
- 3
3. Check for dry temperature sensor fault and condensing sensor fault
- 4
4. Check for freezing in winter season
- 5
5. If Main PCB fault, replace it
This Error Applies To
Samsung WA52J8700A Series Washers (2017) (2017–present)
Related Error Codes
An internal circuit board can't communicate with the main controller
A drying temperature sensor has a problem
There are too many soap suds in the washer
A sensor board inside the washer isn't reading data correctly
A sensor board inside the washer has failed
The washer's main computer chip has malfunctioned
The washer can't detect the position of its internal clutch mechanism
The washer's main computer chip has malfunctioned