Error Code TC2
The dryer temperature sensor isn't reading correctly
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC2
What This Means
Dry temperature sensor fault; Condensing sensor fault; Faulty and incorrect connections of the dry heater; Main PCB fault; Freezing in winter season
What actually causes this:
The drying temperature sensor connector came loose or the sensor went bad
First Thing to Check
Unplug the washer for 5 minutes, then plug it back in — if the error comes back, it needs service
Parts Involved
How to Fix
- 1
1. Check the connections for the dry heater temperature sensor connector
- 2
2. If the dry heater temperature sensor has a functional check, replace it
- 3
3. Check for freezing in winter season
- 4
4. If Main PCB is defective, replace it
This Error Applies To
Samsung WA52J8700A Series Washers (2017) (2017–present)
Related Error Codes
An internal circuit board can't communicate with the main controller
A drying temperature sensor has a problem
There are too many soap suds in the washer
A sensor board inside the washer isn't reading data correctly
A sensor board inside the washer has failed
The washer's main computer chip has malfunctioned
The washer can't detect the position of its internal clutch mechanism
The washer's main computer chip has malfunctioned