Error Code SUD
There are too many soap suds inside the washer
Moderate
Address soon - your appliance may not work properly
Also displayed as: SUD / SUdS
What This Means
Too much detergent used; Wrong type of detergent used (non-HE detergent); Excess foaming from certain fabric types
What actually causes this:
Too much detergent was used or regular detergent was used instead of HE (High Efficiency) detergent
First Thing to Check
Wait for the washer to finish clearing the suds on its own — it will display End when done
How to Fix
- 1
1. Wait for the washer to complete its foam removal cycle — End will display when finished
- 2
2. Verify that the consumer is using HE (High Efficiency) detergent
- 3
3. Verify the correct amount of detergent is being used per the detergent manufacturer instructions
This Error Applies To
Samsung WF45M5 Series Washers (2017) (2017–present)
Related Error Codes
The incoming water is too hot for delicate cycles
Your washer is getting too much electrical power
The washer's door lock has a wiring or switch problem
The WiFi module lost its connection to the main board
Your washer can't tell how much water is inside
The washer's motor isn't spinning correctly
Your washer can't pump the water out
The control panel can't communicate with the main circuit board