How do I fix error code F-2 on my LG LRG3061BD?

1. undefined: Press CLEAR/OFF key to cancel operation; allow oven to cool one hour 2. undefined: Disconnect power to the range 3. undefined: Remove panel and connections on oven sensor 4. undefined: Check sensor resistance at room temperature — should be approximately 1,090 Ohms (1.09 kOhm); if shorted (near zero), replace sensor 5. undefined: Check wire continuity for shorts in harness 6. undefined: Check Power PCB connector CN31 for looseness or terminal damage 7. undefined: If wiring is normal, replace PCB 8. undefined: Enter test mode after repair to confirm sensor reads 65F–95F at room temperature

LG LRG3061BDOvens & Range

Error Code F-2

Q: What does error code F-2 mean on a LG LRG3061BD?

Oven sensor shorted Oven temperature sensor shorted internally; Wiring harness short between sensor and PCB; Moisture or contamination on sensor connector

Oven sensor shorted

Moderate

Address soon - your appliance may not work properly

What This Means

Oven temperature sensor shorted internally; Wiring harness short between sensor and PCB; Moisture or contamination on sensor connector

How to Fix

1
Press CLEAR/OFF key to cancel operation; allow oven to cool one hour
2
Disconnect power to the range
3
Remove panel and connections on oven sensor
4
Check sensor resistance at room temperature — should be approximately 1,090 Ohms (1.09 kOhm); if shorted (near zero), replace sensor
5
Check wire continuity for shorts in harness
6
Check Power PCB connector CN31 for looseness or terminal damage
7
If wiring is normal, replace PCB
8
Enter test mode after repair to confirm sensor reads 65F–95F at room temperature

Other Error Codes for LRG3061BD

F-9

Bake failure — oven fails to reach temperature during bake cycle

F-3

Touch sensor key short (keypad short)

F-1

Oven sensor open circuit

F-6

Oven is too hot — bad oven sensor or bad control (PCB); relay welded closed

Need more help with your LG LRG3061BD?