Error Code F3
Key short — one or more control keys continuously shorted for over 60 seconds
Moderate
Address soon - your appliance may not work properly
What This Means
Stuck or shorted key on touch panel; Control Lock active; Wiring fault to Touch PCB or Main PCB CN5
How to Fix
- 1
Verify Control Lock is not engaged (press and hold Control Lock for 3 seconds to toggle)
- 2
If Control Lock was active, press CLEAR/OFF and check if keys function normally
- 3
Check all connector connections at Main PCB CN5
- 4
If connectors normal, replace Touch PCB
- 5
If issue persists after Touch PCB replacement, replace Main PCB
Other Error Codes for LSIL6332FE
Right Communication Error — communication error at right inverter module
RF Top Sensor Open/Short — Right Front induction cooktop top sensor is open or shorted
Sensor open — oven thermistor circuit is open
Sensor short — oven thermistor circuit is shorted
CR Top Sensor Open/Short — Center Rear induction cooktop top sensor is open or shorted
LF Top Sensor Open/Short — Left Front induction cooktop top sensor is open or shorted
Blower Fan Error — induction cooktop blower fan not working properly
Oven no heating — oven temperature does not exceed 150°F and stays at or below starting temperature for over 5 minutes during preheating with door closed