How do I fix error code C-F0 on my Samsung DOP36M96GLS?

1. undefined: Check versions of Main PBA and Sub PBA programs via HASS connector — versions must match 2. undefined: Check wire harness at Main PCB CN470 and Sub PCB CNS200 3. undefined: If harness is disconnected, reconnect completely 4. undefined: Perform operation again and verify normal function 5. undefined: If PBA versions do not match or problem persists, replace the faulty PCB

Samsung DOP36M96GLSOvens & Range

Error Code C-F0

Q: What does error code C-F0 mean on a Samsung DOP36M96GLS?

Main PCB to Sub PCB communication error PBA program version mismatch between Main and Sub PCB; Wire harness disconnected between Main PCB CN470 and Sub PCB CNS200

Main PCB to Sub PCB communication error

Moderate

Address soon - your appliance may not work properly

What This Means

PBA program version mismatch between Main and Sub PCB; Wire harness disconnected between Main PCB CN470 and Sub PCB CNS200

How to Fix

1
Check versions of Main PBA and Sub PBA programs via HASS connector — versions must match
2
Check wire harness at Main PCB CN470 and Sub PCB CNS200
3
If harness is disconnected, reconnect completely
4
Perform operation again and verify normal function
5
If PBA versions do not match or problem persists, replace the faulty PCB

Other Error Codes for DOP36M96GLS

C-21

Oven internal overheating — oven temperature reaches 650 F (343 C) in any cooking function except self-clean

C-30

PCB sensor opened or PCB sensor shorted (onboard NTC thermistor fault)

C-d0

Short key — short circuit detected at control interface at connector CN300 on Main PCB or Sub PCB

C-d1

Door locking information — door lock motor or switch malfunction

C-31

PCB sensor temperature high — onboard PCB NTC thermistor reading abnormally high temperature

C-20

Oven sensor open (over 2950 ohm) or oven sensor short (under 930 ohm)

Need more help with your Samsung DOP36M96GLS?