Error Code C-F2
Communication between Main and Touch PCB is interrupted
Moderate
Address soon - your appliance may not work properly
What This Means
Sub PCB connector not inserted; Ribbon cable from touch panel not connected normally into Sub PCB; Defective Sub PCB
How to Fix
- 1
Disconnect power
- 2
Unplug connector on Sub PCB
- 3
Check if ribbon cable from touch panel is connected normally into Sub PCB
- 4
Repair damaged wire or replace if necessary
- 5
Replace Sub PCB if no issue with connector detected
- 6
Replace control PCB if problem persists after replacing Sub PCB
Other Error Codes for NE58R9431ST
Communication between Main and Sub PCB is interrupted
Keypad short circuit
PCB temperature sensor is open when oven is operating
Door lock is mispositioned
Oven temperature rises abnormally high or sensor is short
PCB temperature rises abnormally high
Oven sensor is open when oven is operating