Name: Samsung NE59J7850WG
Brand: Samsung

Question 1

What does error code -dC- mean on Samsung NE59J7850WG?

Accepted Answer

Partition switch malfunction or door sensor circuit failure. Cause: Faulty partition switch; Loose or disconnected harness to partition switch; Damaged main PCB; Circuit pattern issue at CN401.

Question 2

What does error code C-21 mean on Samsung NE59J7850WG?

Accepted Answer

Safety error - Oven sensor malfunction or circuit issue. Cause: Faulty oven sensor; Damaged main PCB pattern; Wrong component contact; Damaged sub PCB pattern; Loose or disconnected sensor harness; Faulty relay (DLB, Bake, Broil, Convection); Loose connector connection at CN301.

Question 3

What does error code C-d0 mean on Samsung NE59J7850WG?

Accepted Answer

Control PCB communication error - Touch control circuit malfunction. Cause: Short circuit at connector TE700 pins on sub PCB; Short circuit between membrane and cable; Faulty touch control PCB; Damaged membrane; Circuit pattern short between micom and connector.

Question 4

What does error code C-d1 mean on Samsung NE59J7850WG?

Accepted Answer

Safety error - Door lock motor or sensor circuit malfunction. Cause: Faulty lock motor; Faulty micro switch; Damaged main PCB; Loose or damaged harness to lock motor; Faulty oven sensor; No AC 120V voltage to lock motor.

Question 5

What does error code C-F0 mean on Samsung NE59J7850WG?

Accepted Answer

Sub PCB communication error - Main PCB to Sub PCB communication failure. Cause: Loose or disconnected connector CN500 or CN201; Short circuit at connector CN500 or CN201 pins; Faulty sub PCB; Faulty main PCB; Circuit pattern damage.

NE59J7850WG

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
-dC-	Partition switch malfunction or door sensor circuit failure	Moderate
C-21	Safety error - Oven sensor malfunction or circuit issue	Moderate
C-d0	Control PCB communication error - Touch control circuit malfunction	Moderate
C-d1	Safety error - Door lock motor or sensor circuit malfunction	Moderate
C-F0	Sub PCB communication error - Main PCB to Sub PCB communication failure	Moderate