What does error code C-30 mean on a Samsung NE59J7850WS?

PCB temp sensor opened Open NTC sensor on PCB; Defective Main PCB; Damaged sensor connection

How do I fix error code C-30 on my Samsung NE59J7850WS?

1. undefined: Remove Main PCB from holder 2. undefined: Measure NTC sensor resistance on backside of PCB (normal: 3.8KΩ at room temperature) 3. undefined: Replace Main PCB if abnormal

Samsung NE59J7850WSOvens & Range

Error Code C-30

PCB temp sensor opened

Moderate

Address soon - your appliance may not work properly

What This Means

Open NTC sensor on PCB; Defective Main PCB; Damaged sensor connection

How to Fix

1
Remove Main PCB from holder
2
Measure NTC sensor resistance on backside of PCB (normal: 3.8KΩ at room temperature)
3
Replace Main PCB if abnormal

Other Error Codes for NE59J7850WS

C-F0

Main PCB communication failure

C-d0

Shorted key

C-d1

Door locking failure

C-20

Oven sensor opened (over 2950Ω)

C-21

Oven heating over

C-31

PCB temp sensor shorted (under 872Ω during 10 sec)

C-dC

Partition switch failure

Need more help with your Samsung NE59J7850WS?