Name: Samsung NE63A6511S
Brand: Samsung

Question 1

What does error code bAd LinE mean on Samsung NE63A6511S?

Accepted Answer

Power connection is installed improperly. Cause: Incorrect power cord connection; Terminal block L1, L2, N installed incorrectly; Loose or damaged power connection.

Question 2

What does error code C-20 mean on Samsung NE63A6511S?

Accepted Answer

Oven sensor opened (over 2950 ohms) or Oven sensor shorted (under 930 ohms). Cause: Oven temperature sensor failure; Damaged or disconnected sensor wiring; Loose terminal connections.

Question 3

What does error code C-21 mean on Samsung NE63A6511S?

Accepted Answer

Oven heating over - internal temperature rises abnormally high. Cause: Oven sensor failure; Stuck bake or broil heater relay; Damaged convection heater relay; Main PCB malfunction.

Question 4

What does error code C-30 mean on Samsung NE63A6511S?

Accepted Answer

Main PCB sensor is open when oven is operating or sensor short. Cause: Main PCB temperature sensor failure; Sensor circuit disconnection or short.

Question 5

What does error code C-31 mean on Samsung NE63A6511S?

Accepted Answer

Main PCB temperature rises abnormally high. Cause: Main PCB overheating; Stuck relay on Main PCB.

Question 6

What does error code C-d0 mean on Samsung NE63A6511S?

Accepted Answer

Short in the control key. Cause: Defective touch keypad; Stuck or shorted control key.

Question 7

What does error code C-d1 mean on Samsung NE63A6511S?

Accepted Answer

Door lock is misaligned or malfunctioning. Cause: Door lock motor failure; Door lock switch malfunction; Disconnected or damaged door lock wiring; Misaligned door lock mechanism.

Question 8

What does error code C-F2 mean on Samsung NE63A6511S?

Accepted Answer

Main to Touch communication is interrupted. Cause: Loose or disconnected touch film tail connector; Main PCB malfunction; Damaged control box assembly.

NE63A6511S

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
bAd LinE	Power connection is installed improperly	Moderate
C-20	Oven sensor opened (over 2950 ohms) or Oven sensor shorted (under 930 ohms)	Moderate
C-21	Oven heating over - internal temperature rises abnormally high	Moderate
C-30	Main PCB sensor is open when oven is operating or sensor short	Moderate
C-31	Main PCB temperature rises abnormally high	Moderate
C-d0	Short in the control key	Moderate
C-d1	Door lock is misaligned or malfunctioning	Moderate
C-F2	Main to Touch communication is interrupted	Moderate