Name: Samsung NE63T8951
Brand: Samsung

Question 1

What does error code -dC- mean on Samsung NE63T8951?

Accepted Answer

Divider inserted or removed while oven operating. Cause: Divider installation during operation; Faulty divider position sensor.

Question 2

What does error code A2 mean on Samsung NE63T8951?

Accepted Answer

DC motor locking or jamming. Cause: Motor wire disconnected; Mechanical interference in rotor or blade; Motor failure; Inverter PCB failure.

Question 3

What does error code bAd LInE mean on Samsung NE63T8951?

Accepted Answer

Power cord installed improperly. Cause: Power connection plugged incorrectly; Terminal block L1, L2, N misaligned; Wire harness connection issue.

Question 4

What does error code C-20 mean on Samsung NE63T8951?

Accepted Answer

Oven sensor opened (over 2950Ω) or oven sensor shorted (under 930Ω). Cause: Oven sensor is open circuit; Oven sensor is short circuit; Damaged wire harness; Poor connector connection.

Question 5

What does error code C-21 mean on Samsung NE63T8951?

Accepted Answer

Oven heating over - abnormal temperature rise. Cause: Oven sensor failure; Heater element failure; Main PCB malfunction; Relay failure (DLB, Broil, Bake, Convection).

Question 6

What does error code C-22 mean on Samsung NE63T8951?

Accepted Answer

Sub PCB sensor open circuit. Cause: Sub PCB sensor disconnected or failed; Wire harness damage.

Question 7

What does error code C-23 mean on Samsung NE63T8951?

Accepted Answer

Temperature probe sensor short circuit. Cause: Probe sensor shorted; Water or moisture intrusion; Failed sensor.

Question 8

What does error code C-30 mean on Samsung NE63T8951?

Accepted Answer

Main PCB sensor open circuit. Cause: Main PCB sensor failed; Wire harness disconnected; Connector issue.

Question 9

What does error code C-31 mean on Samsung NE63T8951?

Accepted Answer

PCB temperature abnormally high. Cause: Excessive ambient temperature; Ventilation blockage; PCB thermal sensor failure.

Question 10

What does error code C-A2 mean on Samsung NE63T8951?

Accepted Answer

Sub PCB temperature abnormally high. Cause: Cooling vent blocked; Excessive ambient temperature; Thermal sensor failure.

NE63T8951

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
-dC-	Divider inserted or removed while oven operating	Moderate
A2	DC motor locking or jamming	Moderate
bAd LInE	Power cord installed improperly	Moderate
C-20	Oven sensor opened (over 2950Ω) or oven sensor shorted (under 930Ω)	Moderate
C-21	Oven heating over - abnormal temperature rise	Moderate
C-22	Sub PCB sensor open circuit	Moderate
C-23	Temperature probe sensor short circuit	Moderate
C-30	Main PCB sensor open circuit	Moderate