Error Code C-23
Meat probe sensor is shorted when oven is operating
Moderate
Address soon - your appliance may not work properly
What This Means
Probe harness shorted; Defective probe sensor; Damaged connector terminals
How to Fix
- 1
Disconnect power
- 2
Disconnect probe harness from control board
- 3
Measure probe resistance (normal 50 kilo-ohms at room temp)
- 4
Check wire harness and connector terminals for damage
- 5
Check probe connector resistance on Main PCB (normal 10-11 kilo-ohms)
- 6
Replace meat probe if resistance is incorrect
Other Error Codes for NV51K7770SS
Drain system problem or water remaining after draining (water level sensor issue)
Steam sensor is open or shorted during steam mode
Cooling motor operating abnormally
Door lock is mispositioned or not operating
Communication between Main and Touch PCB interrupted
PCB temperature sensor is open
Partition inserted or removed while oven is operating
Oven sensor is open when operating (temperature sensor circuit open)