What does error code C-F0 mean on a Samsung NV51M9770DS?

Main and sub control board communication failure Disconnected wire harness; Loose connector; Outdated software version

How do I fix error code C-F0 on my Samsung NV51M9770DS?

1. undefined: Check wire harness at Main PBA CN600 and Sub PBA CNS200 2. undefined: Verify harness is completely connected 3. undefined: Check Main-Sub PBA software version via HASS

Samsung NV51M9770DSOvens & Range

Error Code C-F0

Main and sub control board communication failure

Critical

Stop using immediately - risk of damage or safety issue

Also displayed as: C-F0

What This Means

Disconnected wire harness; Loose connector; Outdated software version

What actually causes this:

The cable between the main and sub control boards is loose or disconnected

First Thing to Check

Visually inspect the ribbon cable between Main PCB and Sub PCB

Parts Involved

Main PCB (CN600)Sub PCB (CNS200)Communication harness

How to Fix

1
Check wire harness at Main PBA CN600 and Sub PBA CNS200
2
Verify harness is completely connected
3
Check Main-Sub PBA software version via HASS

Other Error Codes for NV51M9770DS

C-70

Steam temperature sensor open circuit detected

C-23

Temperature probe sensor short circuit detected

C-72

Drain pump failure or water sensor malfunction in steam system

C-71

Steam temperature sensor short circuit

C-21

Oven temperature control failure causing excessive heating

C-d0

A control button is stuck in pressed position

C-A2

Cooling fan motor failure

C-30

PCB internal temperature sensor open circuit

Need more help with your Samsung NV51M9770DS?