Error Code C-23
Temperature probe circuit fault
Moderate
Address soon - your appliance may not work properly
Also displayed as: C-23
What This Means
Probe sensor shorted; Damaged wire on harness; Damaged terminal on harness; Loose connector connection
What actually causes this:
Damaged probe sensor or shorted wiring in probe circuit
First Thing to Check
Measure meat probe resistance (50kΩ at room temperature)
Parts Involved
How to Fix
- 1
Disconnect power
- 2
Disconnect probe harness from control
- 3
Measure probe resistance (should be 50kΩ at room temperature)
- 4
Check for damaged terminals or wires on harness
- 5
Check resistance of meat probe connector on main PCB (Normal: 10kΩ to 11kΩ)
Other Error Codes for NV51M9770SS
Steam drain pump circuit malfunction
Main and Sub processor communication link failure
Safety interlock triggered - excessive temperature detected
Display/touch panel communication failure
Oven temperature control failure - overheating
Steam generation temperature sensor circuit open
Keypad control circuit short circuit
Oven temperature sensor malfunction