Error Code C-F2
Communication between Main and Touch PCB interrupted
Moderate
Address soon - your appliance may not work properly
What This Means
Sub PCB connector not inserted; Ribbon cable from touch panel disconnected; Sub PCB failure
How to Fix
- 1
Disconnect power
- 2
Check Sub PCB connector insertion
- 3
Verify ribbon cable from touch panel is fully connected
- 4
Replace Sub PCB if no connector issues
- 5
Replace control PCB if Sub PCB replacement doesn't solve
Other Error Codes for NV51M9970SS
Meat probe sensor is shorted when oven is operating
Drain system problem or water remaining after draining (water level sensor issue)
Steam sensor is open or shorted during steam mode
Cooling motor operating abnormally
Door lock is mispositioned or not operating
PCB temperature sensor is open
Partition inserted or removed while oven is operating
Oven sensor is open when operating (temperature sensor circuit open)