Error Code E-0E
Door Locking Error - Door lock in wrong position after 1 minute
Moderate
Address soon - your appliance may not work properly
What This Means
Loose or disconnected wiring harness; Faulty motorized door lock assembly; Defective door locking switch; Damaged PCB
How to Fix
- 1
Disconnect electrical power to range
- 2
Remove rear cover panel
- 3
Check wiring harness connections to motorized door lock assembly
- 4
Check motorized door lock assembly for proper operating resistance
- 5
Measure voltage at connector linked with door lock motor (normal: AC 120V)
- 6
Check door locking switch operation
- 7
Replace faulty door lock switch or lock motor
- 8
Replace PCB if pattern is damaged or parts are wrongly contacted
Other Error Codes for NX58F5300SS
Oven Sensor Shorted (Under 930 Ohms)
Shorted Key - Keypad is pressed for 10 minutes
Oven temperature rises too slowly - fails to reach 125F (52C) within 10 minutes at room temperature
Oven Sensor Opened (Over 2950 Ohms)
Oven Overheating Error - Temperature does not reach 650F (343C) in any cooking function except Self Clean