Name: Samsung NX58H5600SS
Brand: Samsung

Question 1

What does error code -SE- mean on Samsung NX58H5600SS?

Accepted Answer

Shorted key — keypad has been pressed continuously for 10 minutes. Cause: Possible causes include a stuck or shorted membrane keypad, a short circuit in the membrane wire harness, a short between CN301 connector pins on the main PCB, or a short between the membrane keypad and its bracket..

Question 2

What does error code E-08 mean on Samsung NX58H5600SS?

Accepted Answer

Oven temperature rises too slowly — fails to reach 125 degrees F (52 degrees C) within 10 minutes at room temperature. Cause: The oven's inability to attain 125°F (52°C) in 10 minutes at room temperature could stem from a faulty temperature sensor, a defective bake or broil burner, or incorrect gas type orifice sizing..

Question 3

What does error code E-0A mean on Samsung NX58H5600SS?

Accepted Answer

Oven overheating error — oven temperature reaches 650 degrees F (343 degrees C) in any cooking function except Self Clean. Cause: The issue may arise if the oven temperature hits 650°F (343°C) during cooking functions other than Self Clean. Potential causes include a faulty oven temperature sensor, a malfunctioning broil or bake burner that is stuck or failed, or a defective relay assembly..

Question 4

What does error code E-0E mean on Samsung NX58H5600SS?

Accepted Answer

Door locking error — door lock is in the wrong position after 1 minute. Cause: The issue may stem from a malfunctioning motorized door lock assembly, a faulty door locking switch, a disconnected or damaged harness to the door lock motor, or a defective PCB relay..

Question 5

What does error code E-27 mean on Samsung NX58H5600SS?

Accepted Answer

Oven temperature sensor open (resistance over 2950 ohms). Cause: The issue may stem from sensor resistance surpassing 2950 ohms, wires that are damaged or not connected properly, or a faulty connector on the PCB..

Question 6

What does error code E-28 mean on Samsung NX58H5600SS?

Accepted Answer

Oven temperature sensor shorted (resistance under 930 ohms). Cause: Possible causes include sensor resistance below 930 ohms, a short circuit in the sensor wire harness, or a faulty sensor connector..

Question 7

What does error code SE mean on Samsung NX58H5600SS?

Accepted Answer

Shorted key - Control panel membrane keypad pressed for 10 minutes. Cause: Possible causes include a stuck or jammed keypad, short circuit in the membrane control harness, faulty PCB connector, or defective membrane control board..

NX58H5600SS

Symptom routing

Error codes

How to diagnose

Code	Meaning	Severity
-SE-	Shorted key — keypad has been pressed continuously for 10 minutes	Moderate
E-08	Oven temperature rises too slowly — fails to reach 125 degrees F (52 degrees C) within 10 minutes at room temperature	Moderate
E-0A	Oven overheating error — oven temperature reaches 650 degrees F (343 degrees C) in any cooking function except Self Clean	Moderate
E-0E	Door locking error — door lock is in the wrong position after 1 minute	Moderate
E-27	Oven temperature sensor open (resistance over 2950 ohms)	Moderate
E-28	Oven temperature sensor shorted (resistance under 930 ohms)	Moderate
SE	Shorted key - Control panel membrane keypad pressed for 10 minutes	Moderate