Name: Samsung NX58H9950WS
Brand: Samsung

Question 1

What does error code -SE- mean on Samsung NX58H9950WS?

Accepted Answer

Shorted Key - Keypad Pressed Continuously. Cause: Key pad pressed for 10 seconds or more; Short circuit in membrane keypad; Short circuit on PCB connector.

Question 2

What does error code E-08 mean on Samsung NX58H9950WS?

Accepted Answer

Oven Temperature Rises Too Slowly. Cause: Oven fails to reach 125°F (52°C) within 10 minutes at room temperature; Faulty oven temperature sensor; Loose harness connections; Improper burner adjustment; Wrong orifice size for gas type.

Question 3

What does error code E-0A mean on Samsung NX58H9950WS?

Accepted Answer

Oven Overheating in All Cooking Modes. Cause: Oven temperature reaches 650°F (343°C) in non-self-clean modes; Faulty source control relay; Loose wire harnesses; Faulty temperature sensor.

Question 4

What does error code E-0E mean on Samsung NX58H9950WS?

Accepted Answer

Door Locking Error. Cause: Door lock in wrong position after 1 minute; Faulty motorized door lock assembly; Broken door lock switch; Harness not properly connected.

Question 5

What does error code E-21 mean on Samsung NX58H9950WS?

Accepted Answer

Oven Sensor Opened. Cause: Oven sensor resistance over 2950 ohms; Damaged terminal or wire on harness; Disconnected oven sensor connector.

Question 6

What does error code E-22 mean on Samsung NX58H9950WS?

Accepted Answer

Oven Sensor Shorted. Cause: Oven sensor resistance under 930 ohms; Short circuit in sensor harness.

Question 7

What does error code E-24 mean on Samsung NX58H9950WS?

Accepted Answer

Oven Overheating Error. Cause: Temperature does not reach 650°F (343°C) in any cooking function except Self Clean; Faulty oven temperature sensor; Broil or bake burners not lighting properly; Defective ignitor; Loose harness connections; Faulty control relay.

Question 8

What does error code E-83 mean on Samsung NX58H9950WS?

Accepted Answer

Main to SUB PCB Communication Error. Cause: Disconnected wire harness; Faulty main PCB; Faulty display PCB.

NX58H9950WS

What's wrong with your appliance?

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
-SE-	Shorted Key - Keypad Pressed Continuously	Moderate
E-08	Oven Temperature Rises Too Slowly	Moderate
E-0A	Oven Overheating in All Cooking Modes	Moderate
E-0E	Door Locking Error	Moderate
E-21	Oven Sensor Opened	Moderate
E-22	Oven Sensor Shorted	Moderate
E-24	Oven Overheating Error	Moderate
E-83	Main to SUB PCB Communication Error	Moderate