Error Code C-F2
Main to touch panel communication interrupted
Moderate
Address soon - your appliance may not work properly
What This Means
Sub PCB connector not inserted; Ribbon cable disconnected from touch panel; Damaged Sub PCB; Control box malfunction
How to Fix
- 1
Check whether Sub PCB connector properly inserted
- 2
Verify ribbon cable from touch panel connected to Sub PCB
- 3
Repair damaged wire or replace harness
- 4
Disconnect power and unplug Sub PCB connector
- 5
Check ribbon cable connection
- 6
Replace Sub PCB if problem persists
- 7
Replace control box if Sub PCB replacement unsuccessful
Other Error Codes for NX58M9960P
Temperature probe sensor issue (open or short when oven operating)
Steam sensor open or short during steam mode operation
PCB around temperature high (safety error)
Drain system failure - water remained after max draining time
Oven sensor open (over 2950Ω) or Oven sensor short (under 930Ω)
Oven heating over (temperature exceeds acceptable range)
Cooling motor operating abnormally
PCB sensor opened or shorted