What does error code C-F2 mean on a Samsung NX60BB8511SG?

Sub PCB to touch panel communication error — touch IC and PCB signal malfunction Loose or disconnected touch film tail; Sub PCB communication failure; Assy Control Box malfunction; Poor connector contact

How do I fix error code C-F2 on my Samsung NX60BB8511SG?

1. undefined: Check if touch film tail is connected fully 2. undefined: Reconnect touch film tail if loose 3. undefined: Replace sub PCB if problem persists 4. undefined: Replace Assy Control Box if communication still fails

Samsung NX60BB8511SGOvens & Range

Error Code C-F2

Sub PCB to touch panel communication error — touch IC and PCB signal malfunction

Moderate

Address soon - your appliance may not work properly

What This Means

Loose or disconnected touch film tail; Sub PCB communication failure; Assy Control Box malfunction; Poor connector contact

How to Fix

1
Check if touch film tail is connected fully
2
Reconnect touch film tail if loose
3
Replace sub PCB if problem persists
4
Replace Assy Control Box if communication still fails

Other Error Codes for NX60BB8511SG

C-20

Oven temperature sensor open circuit (resistance over 2950 ohms) or shorted (resistance under 930 ohms)

C-d1

Door lock malfunction — door locking mechanism not operating correctly

C-21

Oven overheating — oven temperature is rising excessively beyond set point

C-A2

Ambient temperature of display PCB is extremely high — control board overheating due to cooling fan failure

C-24

Oven vent blocked — airflow obstruction detected at oven vent or cover air outlet

Need more help with your Samsung NX60BB8511SG?