Error Code E iS
Defect of ice-room sensor or ice maker sensor — short-circuit or disconnection
Moderate
Address soon - your appliance may not work properly
Also displayed as: E iS
How to Fix
- 1
Step 1: Check connector between Main PCB and ice-room/ice-maker sensor. Reconnect if loose or disconnected.
- 2
Step 2: Measure resistance at CON3 10th Pin ~ 9th Pin. If 0 ohms (short), replace sensor.
- 3
Step 3: If OL (open), proceed to Step 6.
- 4
Step 4: Compare measured resistance to temperature/resistance table. If out of spec, replace sensor.
- 5
Step 5: If resistance is within spec, explain normal operation to customer.
- 6
Step 6: Check sensor harness continuity. If wiring intact but error persists, replace Main PCB. If wiring is broken, repair harness.
Other Error Codes for LF31S6360W
Defect of Cubed Mini ice maker sensor — short-circuit or disconnection
Wi-Fi modem error — communication error between display MICOM and Wi-Fi modem
Defect of freezer sensor — short-circuit or disconnection of freezer temperature sensor
Defect of freezer defrost sensor — short-circuit or disconnection
Defect of room temperature (ambient) sensor — short-circuit or disconnection
Defect of refrigerator (fresh food) sensor — short-circuit or disconnection
Defect of pantry sensor — short-circuit or disconnection of pantry compartment sensor
Defect of ice maker kit — malfunction of in-door ice maker motor