Error Code E HS
Humidity sensor defect — short-circuit or disconnection of humidity sensor
Moderate
Address soon - your appliance may not work properly
Also displayed as: E HS
How to Fix
- 1
Step 1: Check connector for humidity sensor at Main PCB for looseness.
- 2
Step 2: Measure sensor resistance. If 0 Ω, replace sensor.
- 3
Step 3: If open (OL), replace sensor.
- 4
Step 4: If resistance is within spec, verify harness integrity and connector seating.
Other Error Codes for LRFLS3206S
Freezer sensor defect — short-circuit or disconnection of freezer sensor
Freezer icemaker sensor defect — short-circuit or disconnection of ice maker sensor
Room temperature sensor defect — short-circuit or disconnection of RT sensor
Freezer fan (BLDC) defect — no feedback signal from fan motor for more than 65 seconds
Condenser fan (BLDC) defect — no feedback signal from machine room fan motor for more than 65 seconds
Refrigerator sensor defect — short-circuit or disconnection of refrigerator sensor
Defrost sensor defect — short-circuit or disconnection of freezer defrosting sensor
Low side cycle leakage — detected by low side refrigerant leak, bad compressor, or prolonged door open