Error Code 13E
Humidity sensor output voltage failure
Minor
Usually easy to fix - may resolve on its own
Also displayed as: 13 E
What This Means
Separation of sensor housing part; Contact error or disconnection; Short circuit in sensor circuit
What actually causes this:
Disconnected humidity sensor, internal sensor failure, or wire break in humidity circuit
First Thing to Check
Check that humidity sensor is properly inserted into CN30 housing
Parts Involved
How to Fix
- 1
Check voltage between MAIN PCB CN30 #7 and #9, should be 4.5V to 1.0V
- 2
Verify humidity sensor is properly seated in CN30
- 3
Check voltage supply to sensor (#1-#2) is about 5V
- 4
Check output voltage (#3) is between 1-4V
Other Error Codes for RH25H5611BC
Freezer temperature sensor communication failure
Refrigerator temperature sensor communication failure
Ice maker temperature sensor communication failure
Freezer defrost sensor temperature reading failure
Refrigerator defrost sensor temperature reading failure
Ambient room temperature sensor failure
AC mains input voltage below safe minimum threshold
Freezer fan motor or tachometer feedback signal failure