Error Code Ed5
ezDispense System Error - automatic detergent injection pump connector fault
Moderate
Address soon - your appliance may not work properly
What This Means
Automatic detergent injection pump connector missing or poor contact at Sub PCB Wh6 (1pin, 3pin)
How to Fix
- 1
Confirm Ed5 ERROR is displayed
- 2
Check automatic detergent injection pump connector at Sub PCB Wh6 (1pin, 3pin)
- 3
If connector missing or poor contact: reconnect the connector
- 4
If connector OK: replace Sub PCB
Other Error Codes for WM6700HBA
Pressure Sensor Error - water level sensor malfunction
Over Flow Error - water level too high, possible inlet valve failure
LQC Test Mode - problem with Wi-Fi module
LQC Test Mode - connection problem between display PCB and Wi-Fi module
Door Open Error - door not properly closed or locked
Unbalance Error - load is not evenly distributed in drum
Too much detergent causing excessive suds
ezDispense Softener Pump Error - softener injection pump failure