How do I fix error code dE2 on my LG WM9500HKV?

1. undefined: Same resolution steps as dE1 2. undefined: Check connectors at door switch and main board — reconnect or repair if loose or broken 3. undefined: Check latch hook spring — if not properly adjusted, replace door assembly 4. undefined: Listen for click at Start/Pause — if no click, replace PCB assembly; if click heard, check door switch assembly

LG WM9500HKVWasher

Error Code dE2

Q: What does error code dE2 mean on a LG WM9500HKV?

Door Open Error (variant 2) Door not all the way closed; Loose electrical connections at door switch and PWB assembly; Door switch assembly out of order

Door Open Error (variant 2)

Moderate

Address soon - your appliance may not work properly

What This Means

Door not all the way closed; Loose electrical connections at door switch and PWB assembly; Door switch assembly out of order

How to Fix

1
Same resolution steps as dE1
2
Check connectors at door switch and main board — reconnect or repair if loose or broken
3
Check latch hook spring — if not properly adjusted, replace door assembly
4
Listen for click at Start/Pause — if no click, replace PCB assembly; if click heard, check door switch assembly

Other Error Codes for WM9500HKV

Locked Motor Error

Power Failure — power was cut while washer was operating

Sud

Suds Error — excessive suds detected

Pressure Sensor Error

Overflow Error — water is overflowing (water level frequency over 21.3 kHz)

Water Inlet Error

Drain Error — not fully drained within 10 minutes

EEPROM Error — EEPROM out of order

Need more help with your LG WM9500HKV?