Error Code BC2
A button on the washer control panel appears stuck
Moderate
Address soon - your appliance may not work properly
Also displayed as: BC2
What This Means
Power switch or tact switch continually pressed; Service PBA holding screws too tight; Main PBA switching IC fault; Main relay connections incorrect
What actually causes this:
A button got stuck or screws inside are pressing against a switch
First Thing to Check
Press each button on the control panel firmly once to unstick it
Parts Involved
How to Fix
- 1
1. Check contact between control panel buttons and their corresponding tact switches — must be a gap between button and micro switch
- 2
2. Check if PBA holding screws are too tight — loosen slightly
- 3
3. If main PBA switching IC on/off error occurred, replace main PBA
- 4
4. Check main relay connections — E2 error occurs if incorrect
Other Error Codes for WA44A3405AW
The washer water is getting too hot
The washer's motor controller can't communicate with the main computer
A temperature sensor has failed
The laundry load is uneven and the washer can't spin
The washer isn't filling with water
The cold water hose is connected wrong
The washer door won't lock properly
The laundry load is uneven and the washer can't spin safely