Error Code dC
The washer lid is open while it's trying to run
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC
What This Means
Door not properly closed; Laundry caught in the door; Door switch defective; Main PBA door detection circuit defective
What actually causes this:
The lid wasn't closed all the way, or some clothing got caught in the door
First Thing to Check
Make sure the lid is fully closed and no clothes are sticking out
Parts Involved
How to Fix
- 1
1. Make sure the door is properly closed
- 2
2. Make sure laundry is not caught in the door
- 3
3. Check Reed SW resistance (White-Green Wire): approx 0.2Ω
- 4
4. Check if 120V power cord is disconnected or insulation status
- 5
5. If main PBA door detection circuit is defective, replace it
Other Error Codes for WA44A3405AW
The washer water is getting too hot
The washer isn't filling with water
The cold water hose is connected wrong
The washer door won't lock properly
The laundry load is uneven and the washer can't spin safely
The washer added an extra rinse because the load was uneven
The control boards inside the washer can't communicate
A button on the washer control panel appears stuck