Error Code tE1
The temperature sensor isn't working right
Moderate
Address soon - your appliance may not work properly
Also displayed as: Hot & Mid LED Flash
What This Means
Heater sensor fault; Connector incorrect or disconnected; Wire disconnected; Water frozen causing overheating detection at 100-150°C
What actually causes this:
Temperature sensor disconnected or failed
First Thing to Check
Unplug for a minute and restart
Parts Involved
How to Fix
- 1
1. Check thermistor resistance at 20-30°C: 66.187kΩ to 36.941kΩ
- 2
2. Check sensor connections
- 3
3. Replace if functional error
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for WA45N3050AW
A button appears stuck on the control panel
The washer's motor isn't working
The washer isn't filling with water
The washer can't drain the water out
The control boards can't communicate with each other
Water is leaking inside the washer
Too much water is filling the washer
The laundry load is uneven