Error Code BC2
A button appears stuck on the control panel
Moderate
Address soon - your appliance may not work properly
Also displayed as: BC2
What This Means
Power button continually pressed; Button/switch jammed from deformed panel; PBA holding screws too tight; Other button pressed continuously; Main PBA switching IC error; Main relay connections incorrect
What actually causes this:
A button got stuck or screws are pressing a switch
First Thing to Check
Press each button firmly to unstick it
Parts Involved
How to Fix
- 1
1. Check gap between control panel buttons and tact switches
- 2
2. Loosen PBA holding screws if too tight
- 3
3. If main PBA switching IC error, replace main PBA
- 4
4. Check main relay connections — 'E2' error if incorrect
Other Error Codes for WA45T3400AW
The motor controller can't communicate with the main board
The washer is getting too much power
The washer isn't getting enough power
The clutch sensor is giving incorrect readings
The control boards can't communicate
The washer's motor isn't working
The washer isn't filling with water
The washer can't drain the water out