Error Code Sd
Too many suds were detected and the washer is clearing them
Moderate
Address soon - your appliance may not work properly
Also displayed as: Sd or SUd
What This Means
Too much detergent used; Non-HE detergent used in an HE washer; Detergent residue buildup in the tub
What actually causes this:
Too much detergent was used or you are using regular detergent instead of HE detergent
First Thing to Check
Wait for the cycle to finish — the washer is automatically removing excess suds
How to Fix
- 1
1. Wait for the washer to complete its foam removal process — the normal cycle will proceed automatically
- 2
2. Verify the type and amount of detergent being used
- 3
3. Run a Pure Cycle (tub cleaning) to remove detergent buildup
Other Error Codes for WA50F9A6DSW
The washer cannot detect how much water is in the tub
The washer has detected a water leak
The washer's motor cannot spin or is detecting a problem
The washer is not getting enough water to fill
The washer cannot pump the water out
The washer's control boards cannot communicate with each other
A button on the control panel appears to be stuck
The washer does not detect the door as properly closed