Error Code 5C
The washer cannot pump the water out.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 5C
What This Means
Drain pump motor impeller is damaged internally; Wrong voltage supplied to parts; Drain pump part fault; Freezing in winter season; Drain hose is clogged (injection check, foreign material); Foreign material clogging drain pump (rubber bands, bills, cotton, hair pins, coins); Water pump terminal not connected; Broken wires or disconnection
What actually causes this:
Small items like coins, hair pins, or socks got past the drum and are blocking the drain pump filter.
First Thing to Check
Locate the small access door at the bottom front of the washer, open it, and check the drain pump filter for trapped objects like coins, hair pins, or lint buildup.
Parts Involved
How to Fix
- 1
1. Check the natural drain in the same manner
- 2
2. Check if there is any alien substance inside the drain pump
- 3
3. Check drain pump resistance (Resistance: 13.5 to 16.5 ohms)
- 4
4. Check for any incorrect connections or broken wires
- 5
5. If the machine malfunctions intermittently, check the drain pump resistance
- 6
6. If the motor stops due to water being frozen, remove the frozen water referring to relevant repair procedures
- 7
7. If the drain pump is defective, replace the pump
- 8
8. Check main PCB if defective
Other Error Codes for WA50K8600AW
The washer's temperature sensor is giving wrong readings.
A specific internal water leak has been found.
There are too many soap suds in the washer.
The washer's vibration sensor board has a problem.
The washer's clutch position sensor is sending incorrect signals.
The washer's main computer chip has crashed.
The washer cannot detect how much water is in the tub.
The washer's motor cannot spin or is getting bad signals.