Error Code 8C2
The washer's vibration sensor board has failed.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C2
What This Means
MEMS PBA is defective; Wire disconnection or PBA silver nano part malfunction
What actually causes this:
The MEMS sensor board or water level sensor has failed.
First Thing to Check
Unplug the washer for 2 minutes and plug it back in to reset.
Parts Involved
How to Fix
- 1
1. Check the wire connections
- 2
2. Replace the MEMS PBA
- 3
3. Check main PBA wire connection or PBA silver nano part — replace if necessary
Other Error Codes for WA50K8600AW
The washer's temperature sensor is giving wrong readings.
A specific internal water leak has been found.
There are too many soap suds in the washer.
The washer's vibration sensor board has a problem.
The washer's clutch position sensor is sending incorrect signals.
The washer's main computer chip has crashed.
The washer cannot detect how much water is in the tub.
The washer's motor cannot spin or is getting bad signals.