Error Code SUD
There are too many soap suds in the washer.
Moderate
Address soon - your appliance may not work properly
Also displayed as: SUD or SUdS
What This Means
Too much detergent used; Non-HE detergent used in HE washer; Excessive foaming detected during wash cycle
What actually causes this:
Too much detergent was added, or regular (non-HE) detergent was used instead of High Efficiency detergent.
First Thing to Check
Let the washer finish its suds-reduction cycle — it will handle this automatically. Next time, use less detergent.
How to Fix
- 1
1. Verify customer is using HE (High Efficiency) detergent
- 2
2. Check amount of detergent being used
- 3
3. 'SUdS' displayed during foam removal, 'End' displayed when removal is finished
- 4
4. Normal cycle proceeds after foaming is removed
Other Error Codes for WA50K8600AW
The washer's DR module lost communication with the main board.
The washer's temperature sensor is giving wrong readings.
A specific internal water leak has been found.
The washer's motor cannot spin or is getting bad signals.
The washer's vibration sensor board has a problem.
The washer's clutch position sensor is sending incorrect signals.
The washer's main computer chip has crashed.
The washer cannot detect how much water is in the tub.