Error Code OC
The washer is overfilling with water beyond the safe level.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OC
What This Means
Water supplied continuously because water level detection does not work; Drain hose clogged causing water level detection failure; Water supplied continuously due to freezing or foreign material in water supply valve; Water level sensor degraded; Water level sensor terminal out of place
What actually causes this:
The water level sensor has worn out and can no longer tell the washer to stop filling.
First Thing to Check
Turn off both water faucets behind the washer immediately to stop water flow, then unplug the machine.
Parts Involved
How to Fix
- 1
1. Check if the water level sensor is defective — replace if so
- 2
2. Check for freezing or foreign materials in the water supply valve
- 3
3. Verify water level sensor terminal is properly seated
Other Error Codes for WA50K8600AW
The washer's temperature sensor is giving wrong readings.
A specific internal water leak has been found.
There are too many soap suds in the washer.
The washer's vibration sensor board has a problem.
The washer's clutch position sensor is sending incorrect signals.
The washer's main computer chip has crashed.
The washer cannot detect how much water is in the tub.
The washer's motor cannot spin or is getting bad signals.