Error Code TC4
The washer's power module is overheating.
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC4
What This Means
IPM temperature is abnormally high; Main PCB fault; Power condition fault
What actually causes this:
The washer's main control board power module is running too hot, often from poor ventilation or a board fault.
First Thing to Check
Unplug the washer and let it cool for 30 minutes. Make sure there is adequate ventilation around the machine.
Parts Involved
How to Fix
- 1
1. Check the consumer's power conditions
- 2
2. Check the operating voltage
- 3
3. If main PCB fault, replace the main PBA
Other Error Codes for WA50K8600AW
The washer's temperature sensor is giving wrong readings.
A specific internal water leak has been found.
There are too many soap suds in the washer.
The washer's vibration sensor board has a problem.
The washer's clutch position sensor is sending incorrect signals.
The washer's main computer chip has crashed.
The washer cannot detect how much water is in the tub.
The washer's motor cannot spin or is getting bad signals.